3A 4A 5A 13X Zeolite Molecular Sieve For Chemical Agent 2.0-3.0mm, 3.0-5.0mm,4.0-6.0mm
Products Introduction
A 3A molecular sieve is a kind of molecular sieve (alkali metal aluminosilicate) whose aperture is 3 Å.
Sometimes, it is also called 3A zeolite molecular sieve.
Chemical Formula: 2/3K2O•1/3Na2O•Al2O3• 2 SiO2 • 9/2 H2O
Silica-alumina Ratio: SiO2/ Al2O3≈2
Aperture: 3 Å 3A molecular sieves do not adsorb chemicals whose molecular diameters are larger than 3Å. The application characteristics of this molecular sieve include fast adsorption speed, frequent regeneration ability, crushing resistance and pollution resistance. These features can improve its use efficiency and prolong its useful life. 3A molecular sieves are the necessary desiccant in petroleum and chemical industries for refining oil, polymerization, and chemical gas-liquid depth drying.
Technical Index
| Molecular Sieve 3A Typical Physical Properties |
| Item | Unit | 8*12 Mesh | 4*6 Mesh |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 |
| Bulk Density | g/ml ≥ | 0.70-0.82 | 0.65-0.80 |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 19.0-21.0 | 19.0-21.0 |
| Equilibrium Ethylene Capacity | mg/g≤ | 3.0 | 3.0 |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 |
| Crush Strength | Point Contact | N ≥ | 20-58 | 80-130 |
| Variation Coefficient | - | 0.3 | 0.3 |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 |
| Size Qualification | % ≥ | 98 | 98 |
| Package Moisture | wt% ≤ | 1.5 | 1.5 |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 3A |
| Molecular Sieve 4A Typical Physical Properties |
| Items | Unit | 8*12 Mesh | 4*6 Mesh |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 |
| Bulk Density | g/ml ≥ | 0.70-0.82 | 0.65-0.80 |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 20.5-22.5 | 20.5-22.5 |
| Equilibrium Methanol Capacity | wt% ≥ | 15.0 | 15.0 |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 |
| Crush Strength | Point Contact | N ≥ | 30-80 | 85-160 |
| Variation Coefficient | - | 0.3 | 0.3 |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 |
| Size Qualification | % ≥ | 98 | 98 |
| Package Moisture | wt% ≤ | 1.5 | 1.5 |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 4A |
| Molecular Sieve 5A Typical Physical Properties |
| Items | Unit | 8*12 Mesh | 4*6 Mesh |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 |
| Bulk Density | g/ml ≥ | 0.70-0.82 | 0.65-0.80 |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 20.5-22.0 | 20.5-22.0 |
| Equilibrium N-hexane Capacity | wt% ≥ | 14.0 | 14.0 |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 |
| Crush Strength | Point Contact | N ≥ | 30-60 | 80-130 |
| Variation Coefficient | - | 0.3 | 0.3 |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 |
| Size Qualification | % ≥ | 98 | 98 |
| Package Moisture | wt% ≤ | 1.5 | 1.5 |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 5A |
| Molecular Sieve 13X Typical Physical Properties |
| Items | Unit | 8*12 Mesh | 4*6 Mesh |
| Bead Size | mm | 1.6-2.5 | 3.0-5.0 |
| Bulk Density | g/ml ≥ | 0.68-0.85 | 0.65-0.80 |
| Equilibrium Water Capacity @ 25℃ | wt% ≥ | 24.0-27.0 | 24.0-27.0 |
| Equilibrium Carbon Dioxide Capacity | wt% ≥ | 18 | 18 |
| Heat of Adsorption | BTU/lb of H2O | 1800 | 1800 |
| Crush Strength | Point Contact | N ≥ | 30-80 | 80-130 |
| Variation Coefficient | - | 0.3 | 0.3 |
| Attrition Rate | wt% ≤ | 0.1 | 0.1 |
| Size Qualification | % ≥ | 97 | 97 |
| Package Moisture | wt% ≤ | 1.5 | 1.5 |
| The interval value of the indexes above are on the basis of the different grade of Molecular Sieve 13X |
Attention
1. The product cannot be exposed in the open air and should be stored in dry condition with air-proof package
2. The product should be regenerated after a certain period of adsorption. The appropriate regenerated temperature would be better below 350°C.
Product Tags:
|
|
Chemical Drying Zeolite Molecular Sieves High Temp For Chemical Agent Images
|
